Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Kosaka, Wataru; Uchibori, Akihiro; Yanagisawa, Hideki*; Takata, Takashi; Jang, S.*
Nihon Kikai Gakkai Rombunshu (Internet), 88(905), p.21-00310_1 - 21-00310_9, 2022/01
If a pressurized water/water-vapor leaks from a heat transfer tube in a steam generator (SG) in a sodium-cooled fast reactor (SFR), sodium-water reaction forms high-velocity, high-temperature, and corrosive jet. It would damage the other tubes and might propagate the tube failure in the SG. Thus, it is important to evaluate the effect of the tube failure propagation for safety assessment of SFR. The computational code LEAP-III can evaluate water leak rate during the tube failure propagation with short calculation time, since it consists of empirical formulae and one-dimensional equations of conservation. One of the empirical models, temperature distribution evaluation model, evaluates the temperature distribution in SG as circular arc isolines determined by experiments and preliminary analyses instead of complicated real distribution. In order to improve this model to get more realistic temperature distribution, we have developed the Lagrangian particle method based on engineering approaches. In this study, we have focused on evaluating gas flow in a tube bundle system, and constructed new models for the gas-particles behavior around a tube to evaluate void fraction distribution near the tube. Through the test analysis simulating one target tube system, we confirmed the capability of the models and next topic to improve the models.
Umeda, Ryota; Shimoyama, Kazuhito; Kurihara, Akikazu
Nihon Genshiryoku Gakkai Wabun Rombunshi, 19(4), p.234 - 244, 2020/12
Sodium-water reaction caused by failure of the steam generator tube of sodium-cooled fast reactor induce the wastage phenomenon, which has erosive and corrosive feature. In this report, the authors have performed the self-wastage experiments under high sodium temperature condition to evaluate the effect of wastage form/geometry by using two types of initial defect such as the micro fine pinhole and fatigue crack, and water leak rate on self-wastage rate. Based on the consideration of crack type influence, it was confirmed that self-wastage rate did not strongly depend on the initial defect geometry. As a mechanism of the self-plug phenomenon, it is speculated that sodium oxide intervenes and inhibits the progress of self-wastage. The dependence of initial sodium temperature on self-wastage rate was clearly observed, and new self-wastage correlation was derived considering the initial sodium temperature.
Uchibori, Akihiro; Yanagisawa, Hideki*; Takata, Takashi; Li, J.*; Jang, S.*
Mechanical Engineering Journal (Internet), 7(3), p.19-00548_1 - 19-00548_11, 2020/06
Evaluation of occurrence possibility of tube failure propagation under sodium-water reaction accident is an important issue. In this study, a numerical analysis method to predict occurrence of failure propagation by overheating rupture was constructed to expand application range of an existing computer code. Applicability of the method was constructed through the numerical analysis of the experiment on water vapor discharging in liquid sodium. To improve the evaluation accuracy for the temperature distribution, a Lagrangian particle model for simulating reacting jet was also developed as an alternative method and its basic function was confirmed.
Uchibori, Akihiro; Watanabe, Akira*; Takata, Takashi; Ohshima, Hiroyuki
Nuclear Technology, 205(1-2), p.119 - 127, 2019/01
Times Cited Count：3 Percentile：31.89(Nuclear Science & Technology)To evaluate a sodium-water reaction phenomenon in a steam generator of sodium-cooled fast reactors, a computational fluid dynamics code SERAPHIM, in which a compressible multicomponent multiphase flow with sodium-water chemical reaction is computed, has been developed. The original SERAPHIM code is based on the difference method. In this study, unstructured mesh-based numerical method was developed to advance a numerical accuracy for the complex-shaped domain including multiple heat transfer tubes. Numerical analysis of an underexpanded jet experiment was performed as part of validation of the unstructured mesh-based numerical method. The calculated pressure profile and location of the Mach disk showed good agreement with the experimental data. Applicability of the numerical method for the actual situation was confirmed through the analysis of water vapor discharging into liquid sodium.
Uchibori, Akihiro; Yanagisawa, Hideki*; Takata, Takashi; Ohshima, Hiroyuki
Proceedings of 11th Korea-Japan Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-11) (Internet), 6 Pages, 2018/11
Evaluation of occurrence possibility of tube failure propagation under sodium-water reaction accident is an important issue. In this study, a numerical analysis method to predict occurrence of failure propagation by overheating rupture was constructed to expand application range of an existing computer code. Applicability of the method was constructed through the numerical analysis of the experiment on water vapor discharging in liquid sodium.
Uchibori, Akihiro; Takata, Takashi; Yanagisawa, Hideki*; Li, J.*; Jang, S.*
Proceedings of 2018 ANS Winter Meeting and Nuclear Technology Expo; Embedded Topical International Topical Meeting on Advances in Thermal Hydraulics (ATH 2018) (USB Flash Drive), p.1289 - 1294, 2018/11
Evaluation of occurrence possibility of tube failure propagation under sodium-water reaction accident is an important issue. In this study, a numerical analysis method to predict occurrence of failure propagation by overheating rupture was constructed to expand application range of an existing computer code. Applicability of the method was constructed through the numerical analysis of the experiment on water vapor discharging in liquid sodium. To improve the evaluation accuracy for the temperature distribution, a Lagrangian particle model for simulating reacting jet was also developed as an alternative method and its basic function was confirmed.
Sugimoto, Taro*; Saito, Shimpei*; Kaneko, Akiko*; Abe, Yutaka*; Uchibori, Akihiro; Ohshima, Hiroyuki
Proceedings of 26th International Conference on Nuclear Engineering (ICONE-26) (Internet), 7 Pages, 2018/07
A computational fluid dynamics code for a sodium-water reaction phenomenon in a steam generator of sodium-cooled fast reactors has been developed. In order to provide the data for validation of this code, the visualization experiment on liquid droplet entrainment in the high-pressure air jet submerged in the water pool was carried out. The experiment successfully elucidated the behavior, such as atomization of the relatively large diameter liquid droplet generated from the gas-liquid interface.
Uchibori, Akihiro; Watanabe, Akira*; Takata, Takashi; Ohshima, Hiroyuki
Journal of Nuclear Science and Technology, 54(10), p.1036 - 1045, 2017/10
Times Cited Count：5 Percentile：44.54(Nuclear Science & Technology)To evaluate a sodium-water reaction phenomenon in a steam generator of sodium-cooled fast reactors, a computational fluid dynamics code SERAPHIM, in which a compressible multicomponent multiphase flow with sodium-water chemical reaction is computed, has been developed. The original SERAPHIM code is based on the difference method. In this study, unstructured mesh-based numerical method was developed to advance a numerical accuracy for the complex-shaped domain including multiple heat transfer tubes. Numerical analysis of an underexpanded jet experiment was performed as part of validation of the unstructured mesh-based numerical method. The calculated pressure profile showed good agreement with the experimental data. Applicability of the numerical method for the actual situation was confirmed through the analysis of water vapor discharging into liquid sodium. The effect of use of the unstructured mesh was also investigated by the two analyses using structured and unstructured mesh.
Uchibori, Akihiro; Takata, Takashi; Ohshima, Hiroyuki; Watanabe, Akira*
Proceedings of 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-17) (USB Flash Drive), 12 Pages, 2017/09
To evaluate a sodium-water reaction phenomenon in a steam generator of sodium-cooled fast reactors, a computational fluid dynamics code SERAPHIM, in which a compressible multicomponent multiphase flow with sodium-water chemical reaction is computed, has been developed. The original SERAPHIM code is based on the difference method. In this study, unstructured mesh-based numerical method was developed to advance a numerical accuracy for the complex-shaped domain including multiple heat transfer tubes. Numerical analysis of an underexpanded jet experiment was performed as part of validation of the unstructured mesh-based numerical method. The calculated pressure profile and location of the Mach disk showed good agreement with the experimental data. Applicability of the numerical method for the actual situation was confirmed through the analysis of water vapor discharging into liquid sodium.
Kojima, Saori*; Uchibori, Akihiro; Takata, Takashi; Ohno, Shuji; Fukuda, Takeshi*; Yamaguchi, Akira*
Proceedings of 10th Japan-Korea Symposium on Nuclear Thermal Hydraulics and Safety (NTHAS-10) (USB Flash Drive), 8 Pages, 2016/11
Analytical evaluation on a self-wastage phenomenon at heat transfer tubes in the steam generator of sodium cooled fast reactors has been performed by using the sodium-water reaction analysis code SERAPHIM. In this study, a fluid-structure thermal coupling model was developed and incorporated in the SERAPHIM code to evaluate heat transfer between the sodium-side reacting flow and the outer surface of the heat transfer tube. The effect of the fluid-structure thermal coupling model on the temperature field was demonstrated through the numerical analyses.
Uchibori, Akihiro; Watanabe, Akira*; Takata, Takashi; Ohno, Shuji; Ohshima, Hiroyuki
Proceedings of OECD/NEA & IAEA Workshop on Application of CFD/CMFD Codes to Nuclear Reactor Safety and Design and their Experimental Validation (CFD4NRS-6) (Internet), 11 Pages, 2016/09
For assessment of the wastage environment under tube failure accident in a steam generator of sodium-cooled fast reactors, a mechanistic computer code called SERAPHIM calculating compressible multicomponent multiphase flow with sodium-water chemical reaction has been developed. The original SERAPHIM code is based on the finite difference method. In this study, unstructured mesh-based numerical method was developed and introduced into the SERAPHIM code to advance a numerical accuracy for the complex-shaped domain including multiple heat transfer tubes. Validity of the unstructured mesh-based SERAPHIM code was investigated through the analysis of an under expanded jet experiment. The calculated pressure profile showed good agreement with the experimental data. Numerical analysis of water vapor discharging into liquid sodium was also performed. It was demonstrated that the proposed numerical method could be applicable to evaluation of the sodium-water reaction phenomenon.
Uchibori, Akihiro; Kurihara, Akikazu; Ohshima, Hiroyuki
AIP Conference Proceedings 1702, p.040010_1 - 040010_4, 2015/12
Times Cited Count：0 Percentile：0(Physics, Applied)A Multiphysics analysis system was newly developed to evaluate possibility of failure propagation occurrence in a steam generator of sodium-cooled fast reactors. The system consists of the computer codes, SERAPHIM, TACT, and RELAP5. The SERAPHIM code calculates the multicomponent multiphase flow involving sodium-water chemical reaction. Applicability of the SERAPHIM code was confirmed through the analyses of the basic experiment and the experiment on water vapor discharging in liquid sodium. The TACT code was developed to calculate heat transfer from the reacting jet to the adjacent tube and to predict the tube failure occurrence. The numerical models of the TACT code were verified through some related experiments. The RELAP5 code evaluates thermal hydraulic behavior of water inside the tube. The original heat transfer correlations were corrected for the rapidly heated tube. The developed system enabled us to evaluate the wastage environment and possibility of failure propagation.
Uchibori, Akihiro; Ohshima, Hiroyuki
Proceedings of 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-16) (USB Flash Drive), p.533 - 544, 2015/08
For assessment of the wastage environment under tube failure accident, a mechanistic computer code called SERAPHIM calculating compressible multicomponent multiphase flow with sodium-water chemical reaction has been developed. In this study, applicability of the SERAPHIM code including the numerical model for liquid droplet entrainment and transport was investigated through the analysis of the basic experiment and the experiment under actual condition of the steam generator. In the analysis of the basic experiment, the calculated pressure variation during liquid droplet entrainment was consistent with the experimental result. In the analysis of the actual condition, the calculated temperature distribution agreed with the measurement result well. The region with higher impingement velocity of the liquid droplet was close to the wastage region confirmed in the experiment. It was demonstrated that the SERAPHIM code could predict the wastage environment under the actual condition.
Jang, S.*; Takata, Takashi; Yamaguchi, Akira*; Uchibori, Akihiro; Kurihara, Akikazu; Ohshima, Hiroyuki
Proceedings of 16th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-16) (USB Flash Drive), p.4275 - 4288, 2015/08
Numerical analysis of the self-wastage phenomenon was carried out using a multi-dimensional computational code called SERAPHIM. Several steps of numerical analysis were constructed to reproduce transient self-wastage phenomenon caused by Sodium Water Reaction (SWR). Numerical analysis of multiphase flow with chemical reaction near the initial crack is firstly performed. The wastage amount is evaluated based on hypothetical Arrhenius equation by using the temperature and molar concentration of sodium hydroxide. New analytical grid is created by exchanging the solid cells to fluid cells in the reaction based on the wastage amount evaluation. These series of procedure is repeated. The width and the shape of the enlarged crack showed good agreement with the experimental results.
Uchibori, Akihiro; Ohshima, Hiroyuki
Proceedings of 23rd International Conference on Nuclear Engineering (ICONE-23) (DVD-ROM), 7 Pages, 2015/05
For assessment of the wastage environment under tube failure accident, a mechanistic computer code called SERAPHIM calculating compressible multicomponent multiphase flow with sodium-water chemical reaction has been developed. In this study, applicability of the SERAPHIM code was investigated through the analysis of the experiment on water vapor discharging in liquid sodium under actual condition of the steam generator. The numerical result showed that the underexpanded jet appeared and impinged on the target tube located above the discharging tube. The calculated temperature distribution agreed with the measurement result well. The liquid droplet entrainment and its transport were considered in this analysis. The region with higher impingement velocity of the liquid droplet was close to the wastage region confirmed in the experiment. It was demonstrated that the SERAPHIM code could predict the temperature distribution and the environment of LDIE under the actual condition.
Nishi, Yoshihisa*; *; Furuya, Masahiro*; *; Matsubayashi, Masahito; Tsuruno, Akira
Fifth World Conf. on Neutron Radiography, 0, p.548 - 555, 1996/00
no abstracts in English
A.Rinejski*; T.J.Ledwidge*; J.Black*; S.E.F.Rofe*; C.Cornu*; C.Journeau*; K.P.Scherer*; P.Stiller*; O.P.Singh*; G.S.Srinivasan*; et al.
SMORN-VII,Symp. on Nuclear Reactor Surveillance and Diagnostics,Vol. 1, 0, P. 5_3, 1995/00
no abstracts in English
